Hypromellose 0.3%

  • HYPROMELLOSE 0.3% multi dose eye drops – 10 ml
  • IMMEDIATE RELIEF – Instant relief from tired, irritated & dry eyes. Hypromellose is well known for its use to treat itchy eyes
  • REFRESHES dry and strained eyes. It soothes that common feeling of grittiness often associated with dry and tired eyes
  • TREATMENT for dry eyes caused by over use of computers, screen and mobile devices as well as cold weather, wind, dust, pollution, heating or air conditioning
  • SUITABLE FOR CONTACT WEARERS – And for everyday use

Ingredients:

Each mI Contains: Hypromellose 0.3% w/v, Benzalkonium Chloride Solution 0.02% (As Preservative)
The other ingredients are Sodium Chloride, Potassium Chloride, Borax, Boric Acid, Sodium Hydroxide Solution and Hydrochloric Acid

Pack Size:

  • Multi dose 10ml of solution

Instruction for Use:

  • First wash your hands
  • Tighten the cap on the nozzle to pierce the tip of the eye drop bottle
  • Rotate the cap anticlockwise to break the seal and remove the cap
  • If you are a contact lens wearer remove your lenses and do not replace until 30 minutes after using eye drops
  • Tilt your head back and look at the ceiling
  • Pull the lower eyelid gently downwards
  • Hold the bottle upside down above the eye and gently squeeze the bottle to release a drop into your eye
  • Avoid touching any part of the aye (or any other surface) with the tip of the
  • bottle
    Keep the affected eye closed and press your fingertip against the inside corner of the closed eve, and hold for 1 minute
  • Repeat for the other eye if necessary
  • Replace and tighten the cap immediately after use
  • These drops are supplied as a sealed bottle with a spiked cap. When using the bottle for the first time, screw the cap down tightly in order to pierce the tip of the bottle

Eye solutions, if handled wrongly, can become contaminated by common bacteria and cause eye infections.

Brand Pack Size DT Price Pipcode
Puroptics Hypromellose 0.3% 10ml 4234928
Download PIL